Progress PAS8060E User Manual Download Page 6

Page: 6 / 16

Heat setting displays

Display

Description

The cooking zone is deactivated.

The cooking zone operates.

The Keep Warm function operates.

The Automatic Heat Up function operates.

There is a malfunction.

The cooking zone is still hot (residual heat).

Lock / The Child Safety Device operates.

The Automatic Switch Off operates.

Residual heat indicator

Warning!

The risk of burns from

residual heat!

DAILY USE

Activation and deactivation

Touch

for 1 second to activate or deac-

tivate the appliance.

Automatic Switch Off

The function deactivates the appliance
automatically if:

• All cooking zones are deactivated ( ).
• You do not set the heat setting after you

activate the appliance.

• You spill something or put something on

the control panel for more than 10 sec-
onds, (a pan, a cloth, etc.). An acoustic
signal sound some time and the appli-
ance deactivates. Remove the object or
clean the control panel.

• You do not deactivate a cooking zone or

change the heat setting. After some time

comes on and the appliance deacti-

vates. See below.

• The relation between heat setting and

times of the Automatic Switch Off func-
tion:
•

— 6 hours

•

— 5 hours

•

— 4 hours

•

— 1.5 hours

The heat setting

Touch

to increase the heat setting.

Touch

to decrease the heat setting. The

display shows the heat setting. Touch
and

at the same time to deactivate the

cooking zone.

Activation and deactivation of the outer
rings

You can adjust the surface you cook to the
dimension of the cookware.
To activate the outer ring touch the sensor
field

. The indicator comes on. For

more outer rings touch the same sensor
field again. The subsequent indicator
comes on.
Do the procedure again to deactivate the
outer ring. The indicator goes out.

Automatic Heat Up

You can get a necessary heat setting in a
shorter time if you activate the Automatic
Heat Up function. This function sets the
highest heat setting for some time (see the
diagram), and then decreases to the neces-
sary heat setting.
To start the Automatic Heat Up function the
cooking zone must be cold (no

in the

display). Touch

of the cooking zone

again and again until the necessary heat
setting comes on. After 3 seconds
comes on in the display.
To stop the function, touch

progress