Progress PAM3000E, User Manual

Page: 16 / 52

Control knob
Sym-
bol Function
0 Off position
- 3
Heat settings
Residual heat
WARNING! There is a risk of
burns from residual heat.
DAILY USE
WARNING! Refer to Safety
chapters.
Before first use
Put cookware containing water on each
cooking zone, set the maximum position
and operate the hob for 10 min. This is to
burn off the residue in the appliance. After
that, operate the hob at minimum position
for 20 min. During this period, an odour and
smoke can occur. This is normal. Make
sure that the airflow is sufficient.
Using the rapid hot plate
A red dot in the middle of the plate shows a
rapid hot plate. A rapid hot plate heats up
faster than usual plates. The red dots are
painted on the plates. They can deteriorate
during use and even disappear completely
after a period of time. It does not have an
effect on the performance of the hob.
The heat setting
To set or change the heat setting turn the
knob to the correct heat setting. To
deactivate turn the knob to off position.
Power indicator activates when one or
more cooking zones are activated. When
you deactivate the cooking zones the
indicator deactivates.
HINTS AND TIPS
WARNING!
Refer to Safety
chapters.
Cookware
The bottom of the cookware
must be as thick and flat as
possible.
CAUTION! Do not use cast iron
pans, potstones, earthenware,
grill or toaster plates. The
stainless steel can become
tarnished if it is too much
heated.
Examples of cooking
applications
Heat
set-
ting: Application:
Keeping warm
1 Gentle simmering
Simmering
2 Frying / browning
Bringing to the boil
3 Bringing to the boil / quick frying /
deep-frying
16 Progress