Heat setting
The hob deacti-
vates after
3 - 4
5 hours
5
4 hours
6 - 9
1.5 hour
The heat setting
To set or change the heat setting:
Touch the control bar at the correct heat
setting or move your finger along the
control bar until you reach the correct heat
setting.
Bridge function
This function connects two left side cooking
zones and they operate as one.
First set the heat setting for one of the left
side cooking zones.
To activate the function:
touch . To
set or change the heat setting touch one of
the control sensors.
To deactivate the function:
touch .
The cooking zones operate independently.
Automatic Heat Up
If you activate this function you can get a
necessary heat setting in a shorter time.
The function sets the highest heat setting
for some time and then decreases to the
correct heat setting.
To activate the function the
cooking zone must be cold.
To activate the function for a cooking
zone:
touch ( comes on). Immediately
touch the correct heat setting. After 3
seconds comes on.
To deactivate the function:
change the
heat setting.
Power function
This function makes more power available
to the induction cooking zones. The
function can be activated for the induction
cooking zone only for a limited period of
time. After this time the induction cooking
zone automatically sets back to the highest
heat setting.
Refer to “Technical information”
chapter.
To activate the function for a cooking
zone:
touch . comes on.
To deactivate the function:
change the
heat setting.
Timer
Count Down Timer
You can use this function to set how long
the cooking zone should operate for a
single cooking session.
First set the cooking zone then set the
function.
You can set the heat setting
before or after you set the function.
To set the cooking zone:
touch again
and again until the indicator of a necessary
cooking zone comes on.
To activate the function or change the
time:
touch or of the timer to set the
time (
00 - 99
minutes). When the indicator
of the cooking zone starts to flash slowly
the time counts down.
To see the remaining time:
set the
cooking zone with . The indicator of the
cooking zone starts to flash quickly. The
display shows the remaining time.
To deactivate the function:
set the
cooking zone with and touch . The
remaining time counts back to
00
. The
indicator of the cooking zone goes out.
8
Progress
