HangTime
TM
Wall
Mount
for Skateboard Decks
(Threaded Mount)
HangTime
TM
Wall Mount Package Contents
1.
The product includes 1 HangTime
TM
Mount Assembly for mounting a single skateboard deck; wall
bracket and threaded mount housing.
2.
Screw fasteners and screw anchors for mounting to the wall.
3.
Screw fasteners for assembling the upper mount housing to the wall bracket.
4.
Screw fasteners for mounting your skateboard deck to the HangTime
TM
Wall Mount.
5.
Instructions.
HangTime
TM
Wall Mount for Skateboard Decks Instructions
IMPORTANT:
Determine the location for the HangTime
TM
Wall Mount. Wall must be sound, strong enough to support the HangTime
TM
mount and your skateboard. Do not hang on a ceiling or angled walls unless there is sufficient support to hold the board and mount.
Location must be free from obstructions, away from beds, doors and traffic areas. It is recommended that your HangTime
TM
mount
be mounted using the screws and anchors provided. HangTime
TM
is not responsible for improper or inadequate mounting. Assembly
requires a Phillips screwdriver and a 3/16” drill. Use of a cordless screwdriver or drill with a Phillips bit will make installation easier.
PLEASE CONTACT US AT 860-436-4470 IF YOU REQUIRE ADDITIONAL HELP
DURING INSTALLATION.
Han
gT
im
eU
SA
.c
om
HangTime
TM
Wall Mount
for snowboards
Other HangTimeUSA
TM
Products:
Magnetic Skateboard Wall Mount
for temporary skateboard mounting
Made in the USA by Progress, Inc.
HangTime
TM
and HangTimeUSA
TM
are trademarks of Progress, Inc. Newington, CT
www.HangTimeUSA.com [email protected]
Copyright
2012. Progress, Inc. All rights reserved.
Tools Required (not included)
Drill
3/16” Drill Bit
Phillips Screwdriver
