Progress 949498098, User Manual

Page: 32 / 40

Accessories
Clean all accessories after each use and let them dry. Use a soft cloth with
warm water and a cleaning agent. Do not clean the accessories in a dish‐
washer.
Do not clean the non-stick accessories using aggressive agents, sharp-
edged objects or in a dishwasher.
Stainless steel or aluminium
ovens
Clean the oven door with a damp cloth or
sponge only. Dry it with a soft cloth.
Do not use steel wool, acids or abrasive
materials as they can damage the oven
surface. Clean the oven control panel with
the same precautions.
Removing the shelf supports
To clean the oven, remove the shelf
supports.
CAUTION! Be careful when
you remove the shelf supports.
1. Pull the front of the shelf support away
from the side wall.
2. Pull the rear end of the shelf support
away from the side wall and remove it.
2
1
Install the removed accessories in the
opposite sequence.
Pyrolysis
CAUTION! Remove all
accessories and removable
shelf supports.
The pyrolytic cleaning
procedure cannot start:
• if you did not fully close the
oven door. In some models,
the display shows "C3"
when this error occurs.
CAUTION! If there are other
appliances installed in the
same cabinet, do not use them
at the same time as the
Pyrolysis function. It can cause
damage to the oven.
During the pyrolytic cleaning the door is
locked. The symbol and the bars of the
heat indicator come up, until the door
unlocks. The door unlocks when the
temperature inside the oven is under
safety conditions and the pyrolytic
cleaning finishes.
During the pyrolytic cleaning the lamp is
turned off.
1. Clean the oven cavity with warm water
and mild detergent. Clean the inner
door glass with warm water and soft
cloth.
2. Clean the inner side of the door with
hot water, so that the residues do not
burn from the hot air.
3. Turn on the oven.
4. Press again and again until the
display shows "Pyro" and the number
of the cleaning programme.
5. Press .
32 Progress