CLOCK FUNCTIONS
Clock functions table
Clock function
Application
COUNT UP TIMER
To set the count up, which shows how long the appliance
operates. This function has no effect on the operation of
the appliance.
TIME OF DAY
To show the time of day. To change the time of day, refer
to "Setting the time".
DURATION
To set how long the appliance operates.
END
To set when the appliance deactivates. You can use Dura‐
tion and End at the same time (Time delay) if you want the
appliance to activate and deactivate automatically later.
SET+GO
To start the appliance with necessary settings with only
one touch of the sensor field any time later.
Count Up Timer
The Count Up Timer is not
activated if Duration and End
are set.
The Count Up Timer starts to count when
the appliance starts to heat.
1. To reset the Count Up Timer, touch
.
2. Touch
until the display shows
"00:00" and the Count Up Timer starts
to count up again.
Setting the DURATION
1. Activate the appliance and set an oven
function and temperature.
2. Touch again and again until the
display shows .
flashes in the display.
3. Use
or
to set the minutes for
DURATION.
4. Touch
to confirm.
5. Use
or
to set the hours for
DURATION.
If you touch or
while
you set the DURATION, the
appliance switches to the
setting of the END function.
6. When the set time ends, an acoustic
signal sounds for two minutes.
and time setting flash in the display.
The appliance deactivates.
7. Touch a sensor field or open the oven
door to stop the acoustic signal.
8. Deactivate the appliance.
Setting the END
1. Activate the appliance and set an oven
function and temperature.
2. Touch again and again until the
display shows .
flashes in the display.
3. Use
or
to set the END and
or to confirm. First you set the
minutes and then the hours.
When the set time ends, an acoustic
signal sounds for two minutes. symbol
and the time setting flash in the display.
The appliance deactivates.
4. Touch a sensor field or open the oven
door to stop the acoustic signal.
Progress 11
