2
·
Manual - Agrónic 4000
And place the nut on the
outside of the box as shown by the
arrow.
Affix the 2 adhesive clips to the
aluminium on the motherboard.
The antenna should be installed
at an elevated point so it has the
best coverage possible or close to a
window. Do not leave the antenna
cable gathered; extend it fully.
7
10
13
Connect the power cable to
the black H6 cable connector on the
relay board.
Connect the data cable to the
series 1 RS-232 port on the board
and fasten the cable using the clips.
In models with more than 32 outputs, the H6 connector on the relay board is
occupied by the extension cable that runs to the secondary box. In this case,
an adapter is provided to connect the 2 power cables.
8
11
NOTE
To extract the SIM card, press
the yellow button.
Close the controller and
re-insert the 4 screws that were
removed in step 2.
9
12
It is important to connect the antenna cable before powering up the controller and to leave the antenna cable extended to
avoid damaging the modem.
