1.
Prepare the water inlet, waste pipe and fixing
rackets as per the dimensions illustrated at right and
the Specification Drawing.
S Trap Installation
180mm
P Trap Installation
170mm
215mm
180mm
180mm
170mm
Important
Refer to Specification Drawing for water inlet positions
180mm
2.
Install the flushing mechanism in the cistern. If you
are using the rear water inlet option then connect the
flexible hose to the connection on the wall.
Place the WC on the floor brackets and push it
back against the wall, taking care of the waste pipe
connection which must be perfectly aligned to each
other. To make the connection easier apply some
lubricant (e.g. liquid soap) to both sides.
S Trap Installation
P Trap Installation
225mm
Connect the water inlet
3.
Check that the toilet is level and if necessary put
some packers underneath the toilet pan to level it up.
Align the toilet and secure it to the floor using the
screws supplied. It is recommennded to tighten the
screws alternatively to secure an equal fit against the
wall.
INSTALLATION INSTRUCTIONS
EVO PLUS 70 COMFORT BACK TO WALL TOILET SUITE
| EVB70N
