d. Plug the 0.5m USB Cable into a USB port on the PC that will control the
VisionDx system.
FORM #00-02-0594
ECN: P1713
REV. C
. Plug the free end of the 0.5m USB Cable into the USB Ethernet Extender,
g. Dress the CAT-V cable through the notch in the bottom of the Control Unit
3.
re the Preva Plus and VisionDX Integrated System is used in a
pass-though cabinet and a PCs is desired for each room, a Dual-Host Switch
ma
a.
ub from the bracket inside the Control Unit.
. Plug the two USB cables for each of the two PCs into J1 and J3 on the
Dual-Host Switch Assembly. Refer to Figure 10.
e
Host with Enclosure. Refer to Figure 10.
Figure 10
f. Use the 50 foot CAT-V Cable to link to the USB-Ethernet Extender
Device.
cover and replace the cover.
OPTION 3: Dual-Host Switch, part number 30-08135.
In the case whe
y be used.
Remove the USB H
b. Replace the Control Insert in the Control Unit Cover with the Dual-Host
Switch Assembly.
c. Plug the USB cable from the Preva Plus Horizontal Arm into J2 on the
Dual-Host Switch Assembly.
d
