30
BICY
CLE
ASSEMBL
Y
INSTRUC
TIO
NS
ASSEMBLE CHAIN COVER
Obtain chain cover screw from frame.
Assemble chain cover on frame.
STEP 6.A
STEP 6.B
6
PEDAL INSTALLATION
7
R
STEP 7.A
STEP 7.B
STEP 7.C
STEP 7.D
LEFT
RIGHT
To fit your pedals, start by identifying left and right pedals. These will be marked
‘L’ and ‘R’ for left and right.
Insert the right pedal by screwing it in CLOCKWISE
like a normal screw. Tighten as far as possible.
NOTE:
The right hand side of the bike is the
chainwheel side of the bike.
Tighten both sides with a 15mm wrench. Ensure the
crank is tightened for safety purposes.
Insert the left pedal by screwing it in COUNTER -
CLOCKWISE the opposite of a normal screw.
Tighten as far as possible.
NOTE:
If you were to sit on the bike holding the
handlebars, your left foot would be the left pedal
WARNING
WARNING
Tightening the pedal the incorrect direction could potentially
damage the threading.
Failure to securely tighten the crank may cause damage to
your bike.
L
Summary of Contents for RIDEFREE
Page 32: ...www progearbikes com au...
