ProFusion PS-10241 Owner'S Manual Download Page 4

 

any adjacent vertical surface. Keep at least 4.5 inches (11.5cm) 
from the back wall (with or without using the wall hanging mounting 
bracket). 
9) Do not insert or allow foreign objects to enter any ventilation or 
exhaust opening as this may cause an electric shock or fire, or 
damage the heater.  
10) To prevent a possible fire, do not block air intakes or exhaust in 
any manner.  
11) A heater has hot and arcing or sparking parts inside. To reduce 
the risk of fire, do not use it in areas where gasoline, paint, or 
flammable vapors and liquids are used or stored.  
12) Use this heater only as described in this manual. Any other use 
not recommended by the manufacturer may cause fire, electric 
shock, or injury to persons.  
13) This product must be installed by a certified electrician, in 
accordance with local codes.  
14) Avoid the use of an extension cord because the extension cord 
may overheat and cause a risk of fire. 
15) This heater is not intended for use in bathrooms, laundry areas 
and similar indoor locations. Never locate heater where it may fall 
into a bathtub or other water container.  

 
 

CAUTION 

– High temperature, risk of fire, keep electrical cords, 

drapery, furnishings, and other combustibles at least 3 feet (0.9 
m) from the front of the heater and away from the side and rear. 

 

PET OWNERS WARNING:

 

The health of some small pets including birds are extremely 
sensitive to the fumes produced during the first-time use of 
many appliances. These fumes are not harmful to humans but 
we recommended that you do not use your heater around birds 
and small pets during its initial use until the manufacturing 
corrosion coatings burn off.

 

 

 

SAVE THESE INSTRUCTIONS 

Summary of Contents for PS-10241














Reviews: