4
Keep at least 4.5 inches (11.5 cm) from the back wall (with or
without using the wall hanging mounting bracket).
9) Do not insert or allow foreign objects to enter any ventilation or
exhaust opening as this may cause an electric shock or fire, or
damage the heater.
10) To prevent a possible fire, do not block air intakes or exhaust in
any manner.
11) A heater has hot and arcing or sparking parts inside. To reduce
the risk of fire, do not use it in areas where gasoline, paint, or
flammable vapors and liquids are used or stored.
12) Use this heater only as described in this manual. Any other use
not recommended by the manufacturer may cause fire, electric
shock, or injury to persons.
13) This product must be installed by a certified electrician, in
accordance with local codes.
14) For supply cables, use 10 AWG (5.3 mm2) copper wires.
15) This heater includes a visual alarm to warn that parts of the
heater are getting excessively hot. If the alarm flashes, immediately
turn the heater OFF and inspect for any objects, on or adjacent to the
heater that may have blocked the airflow or otherwise cause high
temperatures to have occurred.
DO NOT OPERATE THE HEATER WITH THE ALARM FLASHING.
To reset the heater, switch the
CIRCUIT BREAKER
OFF, and wait
five to ten minutes for the unit to cool down before turning the heater
on.
16
）
This appliance is not intended for use by persons (including
children) with reduced physical, sensory or mental capabilities, or
lack of experience and knowledge, unless they have been given
supervision or instruction regarding use of the appliance by a
person responsible for their safety.
Children should be supervised
to ensure that they do not play with the appliance.
CAUTION – High temperature, risk of fire, keep electrical cords,
drapery, furnishings, and other combustibles at least 3 feet (0.9
m) from the front of the heater and away from the side and rear.
SAVE THESE INSTRUCTIONS
