Profoto Connect Pro, User Manual

Page: 19 / 28

Connect Pr
o
19
www.profoto.com
All 100 channels are only selectable in Profoto flashes with AirX connectivity. Older
flashes may only have channel 1-8 or channel 1-20 selectable.
Control mode
The control mode setting is used to select between Air1 or Air2 control
mode. See section “Air 1 and Air 2 control mode” for more information.
X-Sync
The X-sync setting is only visible in Canon and Nikon camera versions
of Connect Pro. The factory setting is OFF. If X-sync is enabled, all
data communication with the camera is disabled. This will completely
disable Hi-Speed sync and Auto flash sync (TTL) functionality, but it will
also enable faster continuous shooting with some camera models. The
generally recommended X-sync setting is OFF.
Selecting 1
st
and 2
nd
(Rear) curtain sync cannot be done though this
menu. This is selected on the camera. On Nikon and Fujifilm cameras
you also need to select Auto FP (HSS) if you want this to be enabled in
the camera.
Bluetooth
The BLUETOOTH setting is used to enable and disable connectivity
with Profoto apps.
•
BLUETOOTH: Select ON to make the Connect Pro discoverable
and OFF to deactivate Bluetooth. When Bluetooth is activated, a
Bluetooth icon is shown at the top bar.
•
When the remote is connected over Bluetooth this is indicated by
the connected Bluetooth icon.
• DISCONNECT: This is only selectable if the Bluetooth is activated
and connected to the Profoto app. It can be selected to force
disconnection from the Profoto app without turning off Bluetooth.