Air
R
emo
te TTL
-C
11
www.profoto.com
Power on/off
1. Press and hold down the ON button [1] to switch on/off the remote.
Note!
The remote automatically turns off after 30 minutes of inactivity. The auto power off can be deactivated by
pressing and holding the “” button [3] when starting the remote. Deactivation is confirmed by two short
beeps.
Note that when auto power off is deactivated new batteries will drain in approximately 20 hours of inactive use.
Channel selection
The currently selected channel is shown in the CHANNEL section on
the Display [2].
1. Press the Channel button [8] repeatedly until the desired channel
is displayed.
Sync selecetion (1st curtain, 2nd curtain and HSS)
The selected sync setting (cameras sync setting) is shown in the SYNC
section on the Display [2].
Press the Sync button [7] to cycle through the sync options:
•
1st: The flashes fire when the first shutter curtain is fully open.
•
2nd: The flashes fire just before the second curtain starts
traveling.
•
Hi-S: HSS (High Speed Sync) mode is selected.
NOTE:
The sync setting can also be selected in the camera menu. Refer to the camera’s user guide.
HSS
HSS enables shooting with flash at a faster shutter speed than the
fastest external flash sync speed (x-sync) of the camera, all the way
down to 1/8000s (may differ between camera models). This option
can be extremely useful to limit the influence of ambient light when
shooting in bright conditions.
