SIM
card
Use a normal
micro
SIM
card
from a chosen operator
(
Not from the mobile organisation '3'
).
Note the phone
number of the card.
In future, use it when you send
text messages to the unit.
1.
Check the micro
SIM
card
.
Place the micro
SIM
card in
a normal
mobile phone.
Check that
you can call and
send/receive messages to/from the
phone.
2.
Deactivate
the PIN code
.
Whilst the micro
SIM
card is
in the phone, you
need to set the microSIM card to
NOT ask for the PIN code
(
perhaps see
how in the
manual of your
mobile telephone
).
3.
Install the micro
SIM
card
.
Remove the micro
SIM
card
and mount it in
the
Piccolo® AIR
unit
(Fig 1
and
fig. 2A).
HOW TO GET THE
REMOTE CONTROL READY
:
A battery from the factory is installed.
See
on the back of the unit which button switches the alarm on.
HOW TO
GET YOUR
PICCOLO® AIR
UNIT READY
:
Press the
SIM
card
into the holder and
push it carefully in place
as shown.
Fig. 1
REMEMBER
to turn the SIM card the
right way up. See
marking by card holder.
Power
The
Piccolo® AIR
unit
can be supplied with power in 3 ways
:
12/24V DC:
Use the
screw terminal
(Fig. 2B)
230V:
Use the
included
converter
Battery:
It is possible to mount a battery in case of
power failure
(Fig. 2C)
1.
Mount the
back-up battery in the plug (optional)
(Fig. 2C).
2.
Mount
the power supply and switch on the power
to the
Piccolo® AIR
unit.
3.
The unit gives a
short beep
and the red control
diode is lit for approximately 30 seconds
.
4.
Afterwards the
control diode
will flash
with a single flash
every 3 seconds.
It shows that
the
Piccolo® AIR
unit
is ready and functions correctly
.
Placing
o
f
the
Piccolo® AIR
unit
The
Piccolo® AIR
unit
must be placed centrally
in relation
to the installed
detector
s.
After the
detectors have been placed at the objects, place the Piccolo® AIR unit in the middle of the
installation.
QUICK
MANUAL
Quick
Red
c
ontrol
diode
Alarm OFF
Alarm ON
Fig. 2
A
B
C
