How to mount myHomeAlarm:
1
Insert SIM card
Push out the SIM card and insert it into the bottom of
the myHomeAlarm control unit. The chip should face
downwards with the angled corner facing towards the
opening.
Important: PIN number must be disabled.
2
Connect power supply
Connect the cable supplied to the unit, and insert into
power socket. Turn on power.
3
The unit boots up …
The small diode on top turns red. Wait for 10 seconds.
The diode fl ashing regularly indicates that the unit is set
up correctly.
A continuous light or several quick fl ashes indicates that
SIM card is missing or inserted incorrectly.
4
Place the
myHomeAlarm
unit correctly
OK
OK
OK
Make sure to place the
myHomeAlarm
unit, so that the
heat pump can “see” the infrared light of the unit.
5
Download the Profort myHome app
Download the FREE
Profort myHom
e app for iOS or
Android.
6
Control myHomeAlarm with smart-
phone
See how to use myHome on the following pages:
Important:
To avoid false alarms
from room sensor,
do
not
place myHome
Alarm directly in the hot
air stream.
