ASSEMBLY
Assembly requires two persons.
Set the treadmill in a cleared area and remove all packing materials; do not
dispose of the packing materials until assembly is completed. Note: The underside of the treadmill walking belt is
coated with high-performance lubricant. During shipping, a small amount of lubricant may be transferred to the
top of the walking belt or the shipping carton. This is a normal condition and does not affect treadmill perfor-
mance. If there is lubricant on top of the walking belt, simply wipe off the lubricant with a soft cloth and a mild,
non-abrasive cleaner.
Assembly requires the included hex keys and your own phillips screwdriver , rubber
mallet , and adjustable spanner .
For help identifying assembly hardware, see the drawings below.
If a part is not in the parts bag, first check
to see if it has been pre-assembled.
1.
Make sure that the power cord is unplugged.
With the help of a second person, carefully tip the
treadmill onto its left side as shown. Partially fold the
Frame (86) so the treadmill is more stable.
Do not fully
fold the treadmill until it is completely assembled.
Insert an Extension Leg (63) into the base of the
Uprights (69) with the Base Pad (61) oriented as shown.
If necessary, use a rubber mallet to fully insert the
Extension Leg. Next, hold two Extension Leg Nuts (46) in
the bottom of the Extension Leg. Insert two Extension
Leg Bolts (93) into the top of the Extension Leg, and
firmly tighten the Extension Leg Bolts into the Extension
Leg Nuts.
Attach two Round Base Pads (57) to the base of the
Uprights (69) with two 1” Tek Screws (39).
3/4” Screw (2)–6
Wheel Nut (32)–2
Wheel Bolt (64)–2
Silver Ground
Screw (75)–1
1” Tek Screw (39)–4
Handrail Bolt (37)–4
1/2” Screw (48)–3
Handrail Star
Washer (95)–2
Extension Leg
Nut (46)–4
Extension Leg Bolt (93)–4
63
86
61
57
69
39
39
93
46
1
6
