ProForm PFTL69212 User Manual Download Page 18

18

If the speed or incline settings are too high or too
low, you can manually override the settings at any
time by pressing the Speed or Incline buttons on
the console. However, when the next “chirp” is
heard, the speed and/or incline will change to
the next settings of the CD or video program.

To stop the walking belt at any time, press the
Stop button on the console. The Time/Incline/
Segment Time display will begin to flash. To
restart the program, press the Start button or the
Speed 

button. After a moment, the walking belt

will begin to move at 1.0 mph. When the next
“chirp” is heard, the speed and incline will
change to the next settings of the CD or video
program
. The program can also be stopped by
pressing the Stop button on your CD player or
VCR.

When the CD or video program is completed, the
walking belt will stop and the Time/Incline/Segment
Time display will begin to flash. Note: To use an-
other CD or video program, press the Stop button
or remove the key and go to step 1 on page 17.

Note: If the speed or incline of the treadmill
does not change when a “chirp” is heard:

• make sure that the iFIT.com indicator is lit and

that the Time/Incline/Segment Time display is
not flashing. If the Time/Incline/ Segment
Time display is flashing, press the Start but-
ton or the Speed 

button on the console

• adjust the volume of your CD player or VCR. If

the volume is too high or too low, the console
may not detect the program signals

• make sure that the audio cable is properly

connected, that it is fully plugged in, and that
it is not wrapped around a power cord

• if you are using your portable CD player and

the CD skips, set the CD player on the floor or
another flat surface instead of on the console.

• See the bottom of page 24.

Follow your progress with the LED track and
the displays.

See step 5 on page 10. 

Measure your heart rate, if desired.

Refer to step 6 on page 11.

When the program is completed, remove the
key.

See step 6 on page 13.

CAUTION: Always remove iFIT.com CDs and
videocassettes from your CD player or VCR
when you are finished using them.

7

6

5

Summary of Contents for PFTL69212































Reviews: