background image

4

Congratulations for selecting the new PROFORM

®

GR

75 exercise cycle. Cycling is one of the most effective
exercises for increasing cardiovascular fitness, building
endurance, and toning the body. The GR 75 exercise
cycle offers a selection of features designed to let you
enjoy this healthful exercise in the convenience and
privacy of your home. 

For your benefit, read this manual carefully before
you use the exercise cycle.

If you have questions

after reading this manual, see the front cover of this
manual. To help us assist you, please note the product

model number and serial number before contacting us.
The model number is PFEX1495.0. The serial number
can be found on a decal attached to the exercise cycle
(see the front cover of this manual for the location of
the decal).

To avoid a registration fee for any service needed
under warranty, you must register the exercise
cycle at www.proformservice.com/registration.

Before reading further, please familiarize yourself with
the parts that are labeled in the drawing below.

REAR

Seat 

Seat Knob

Pedal/Strap

Handgrip Pulse Sensor

Fan

Handlebar

Levelling Foot

RIGHT SIDE

BEFORE YOU BEGIN

Console

Summary of Contents for GR 75





















Reviews: