background image

9

HOW TO LOWER THE TREADMILL FOR USE

To use the treadmill, the bench must be folded to the
storage position. See HOW TO FOLD THE BENCH
TO THE STORAGE POSITION on page 14. 
Caution: You must be able to safely lift 45 pounds
(20 kg) in order to lower the treadmill. 

To lower the
treadmill, hold
the upper end
of the treadmill
with your right
hand as shown.
Hold the tread-
mill knob with
your left hand
and pull it to
the left. Pivot
the treadmill
down a few
inches.

Next, hold the treadmill with both hands as shown
below and lower the treadmill to the floor. To decrease
the possibility of injury, bend your legs and keep
your back straight.

THE PERFORMANT LUBE

TM

WALKING BELT

The CROSSTRAINER features a walking belt coated
with PERFORMANT LUBE

TM

, a high-performance 

lubricant. IMPORTANT: Never apply silicone spray
or other substances to the walking belt or the
walking platform. Such substances will deteriorate
the walking belt and cause excessive wear.

BATTERY INSTALLATION

The console requires three "AA" batteries (not 
included) for operation. Alkaline batteries are recom-
mended. 

To install 
batteries, first
open the bat-
tery cover
under the 
console as
shown. Next,
press three 
batteries into
the battery
compartment.
Make sure that
the negative ends of the batteries (marked “–”) are
touching the springs in the battery compartment.
Close the battery cover.

Note: If there is a thin sheet of clear film on the face of
the console, remove it.

Batteries

Battery Cover

Treadmill
Knob

CAUTION:

Before operating the 

console, read the following precautions.

• Do not stand on the walking belt when turn-

ing on the power. 

• Always wear the clip (see the drawing on

page 10) while using the CROSSTRAINER.
When the key is removed from the console,
the walking belt will stop.

• The CROSSTRAINER is capable of high

speeds. Adjust the speed in small incre-
ments.

• The training zones marked beside the

speed control are general guidelines only.
See page 12 for more information.

• To reduce the possibility of electric shock,

keep the console dry. Avoid spilling liquids
on the console. Use only a sealable water
bottle.

Summary of Contents for 831.297471























Reviews: