OPERATION
SETTING THE ANSWERING MODES:
Answer/Record mode:
When a call is received, the unit will play the OGM1 and then record a message.
1. Make sure the OGM1 is recorded.
2. Press the
ON/OFF
button once
3. The unit will emit 2 short beeps and then play OGM1
4. The message counter will appear in the display indicating the unit is in
answer/Record mode.
NOTES:
* If the unit detects a dial tone, silence or a busy signal, the unit will hang up
and not register the message.
* The unit will shut off if a parallel phone is picked up.
* when the memory is full, "FU" will appear in the display and the TAM-60X will
switch to Answer-only mode
Answer-only mode:
When a call is received, the unit will play the OGM2 and then disconnect.
1. Make sure the OGM2 is recorded.
2. Press the
ON/OFF
button once
3. OGM1 will play and 2 short beeps will be heard.
4. Press the
ON/OFF
button again and the unit will emit 3 short beeps and then
play OGM2.
5. The message counter and "Ao" will then alternate in the display indicating the
unit is in Answer-Only mode.
Answer-OFF mode:
1. Press ON/OFF button unitl "--" appears in the display to set the unit to
the Answer off mode.
CALL SCREENING:
When a call is received, you may listen to the caller leaving an incoming messa-
ge. If you wish to speak with the caller, just pick up the handset to talk (the
machine will turn off automatically).
1. Press the
SPK/MONI
button until "on" appears in the display.
2. Adjust the volumecontrol on the side of your unit to hear the caller.
Press the
SPK/MONI
button again until "OF" appears in the display to turn the
call screen screening off.
8
