Profoon Profoon TX-255, User Manual

Page: 9 / 12

7
1. Ringer Volume Selection
2. Redial Function
3. Speaker Function
4. Flash Function
5.Mute Function
6. Pause Function
HI/LO
HI
LO
RD./P
FLASH
NOTE:
FLASH
MUTE
MUTE. MUTE
Set the ringer volume switch to the desired position ( ) to select
the ringer volume. To have the maximum ringer volume, move the
ringer volume switch to the
position. If you would prefer a gentle
ringer volume, move the ringer volume switch to the position.
Lift the handset or press the button, then press the button to
redial the last dialled number.
To switch your call to speakerphone, press the button and hang up
the handset. To revert back, just pick up the handset. In speaker state,
you can dial the number and receive the call, also you can answer the
call.
Press the button to terminate a call and institute a dialling tone
for another call or to get another call from "Call Waiting" (a special
telephone service).
If you do not have any special telephone service, such as Call
Waiting, pressing the button during a call may disconnect your
current conversation.
If you wish to speak privately to someone else in the room without
your caller overhearing, press the
button once then the LCD will
display To resume normal conversation, just press the
button again.
Allows you to insert a temporary pause during dialling sequence. For
example, dialling an international number (eg: 011-886-22-795-1234),
some telephone company systems will not register the entire number
FUNCTION BUTTONS
14
6. FLASH TIME SETTING
7. HOUR FORMAT SELECTION
8. DATE FORMAT SELECTION
Press the button to enter this setting when the LCD shows
and then the current value will display.
Use the button to set the flash time (100ms/120ms/300ms/
600ms). Press the button to confirm and exit.
Press the button to enter this setting when the LCD shows
and then the current value will display.
Use the button to select the hour format (12H/24H). Press
the button to confirm and exit.
Press the button to enter this setting when the LCD shows
and then the current value will display.
Use the button to select the date format (DD-MM/MM-DD).
Press the button to confirm and exit.
In the DD-MM mode, the time display sequence is day-month and
in the MM-DD mode, the sequence is month-day.
SET
FLASH
HOUR
FORMAT
DATE
FORMAT
or
or
or