-21-
11
TIPS AND WARNINGS
11.1 General:
• Read the user manual carefully and follow all instructions.
• Never place or use the phone in a wet or moist room or
environment.
• Take care of proper heat dissipation; never cover the phone and/or
the power supply adapter(s), and do not place them directly beside
a heat source.
• Use only the included adapter(s); connecting another type of
adapter may cause damage to the electronics.
• Take care that the cable of the phone and the adapter do not get
damaged, and prevent that they cause tripping or falling.
• Never disassemble the base station, the handset(s), the charger(s)
and the adapter(s). This may only be done by qualified personnel.
11.2 Installation:
• Connect or disconnect the cables of the phone and the power
supply adapter only to the base station when the power supply
adapter has been unplugged from the mains socket, and the phone
connector has been disconnected from the phone socket.
• Do not install the phone during a lightning storm.
• Do not install a phone connection point in a wet or moist
environment.
• Do not touch uninsulated phone or adapter cables, unless they are
disconnected from the phone network or the mains power.
11.3 Placement:
• Preferably, do not place the device on surfaces that have been
treated with cellulose; the rubber feet can leave traces on these.
• Do not place the phone in the direct vicinity of other phones
or other electronic (medical) devices, TL tubes and other gas
discharge lamps; the emitted radio waves of these (and other)
wireless phone(s) may disrupt the functioning of the equipment, or
the emitted signals of the equipment disrupt the functioning of the
phone.
