background image

10 of 12 

 

Aircraft Functions and Features 

360 Flip 

Press the direction joystick, to enter the flip 
mode.  The controller will start to bleep, then 
move the joystick in the direction you would 
like the drone to flip. 

Please note when the battery is starting to get 
low, the flip function is disabled 

 

Speed Setting 

The drone is supplied in low speed mode.  This 
mode can be changed by pressing the left joystick.  
The controller will bleep to confirm the speed 
which is selected 

1 Bleep  - 25% Speed 

2 Bleeps  -  50% Speed 

3 Bleeps  -  100% Speed

 

 

Auto Come Back

 

 

The aircraft can be made to return in a fixed 
direction by pressing and the return button.  
When the aircraft is turned on it will 
remember the direction it is oriented and 
upon activation of the One Key Return 
feature it will fly back in that direction.   

NOTE: Be careful to orientate the aircraft 
with the rear tail facing towards you if you 
want the aircraft to fly back towards you using the smart return mode.  You 
can retake full control of the aircraft at any time by moving the right control 
sticks.  The aircraft will not return to where it started, it will simply move in the 
direction it was orientated when turned on.   

Summary of Contents for PFBD103













Reviews: