XB2 Foldable Exercise Bike
E&OE
© 2017 Proflex
6
8.
Bring the seat (
8
), pointed end facing forward, into position on
the top of the seat post, and attach it from underneath using the
3 pre-assembled nuts (
9
). Use the spanner to firmly tighten
(rotate right) the nuts.
9.
Bring the handlebar (
10
) into position so that the arms are
facing forward. Attach it using the 2 pre-assembled screws and
curved washers (
11
) (it is easier to insert these through the
handlebar first). Use the Allen key to firmly tighten (rotate right)
the screws.
10. Insert batteries into the console (
12
), then slide it onto the
mounting plate (
F
) on the handlebar. Insert the cable (
G
) into
the "Sensor Input" connector on the rear of the console.
When correctly assembled, the machine should resemble the image
below and is ready for use.
Folding / Unfolding
To fold, remove the frame locking pin (
H
), then move the handlebar
toward the seat. When the unit is fully folded, re-insert the locking
pin fully through hole (
I
).
To unfold, remove the frame locking pin, then move the handlebar
away from the seat. When the unit is fully unfolded, re-insert the
locking pin fully through hole (
J
).
F
12
G
8
9
10
11
0
F
J
I
Note
: The equipment also comes with a bolt
and acorn nut that can be used in place of the
locking pin as a more "permanent" method of
securing the unit.