background image

10 

 

 

Warranty 

 

General Warranty for  Products: THIS WARRANTY IS EXPRESSLY LIMITED 
TO PERSONS WHO PURCHASE NEW 

 

PRODUCTS FOR PURPOSES OF 

RESALE OR USE AS PER ABOVE INSTRUCTIONS AND IN THE ORDINARY COURSE 
OF THE BUYER’S BUSINESS. ONLY GENUINE PRODUCTS ARE COVERED. 

 

electronic  products  are  warranted  against  defects  in  materials  and 

workmanship for 1 year from date of delivery to the user. This limited warranty is based 
on normal and reasonable use of the product and does not cover any part that has been 
abused,  altered,  used for  a  purpose  other  than for  which  it  was  intended,  or  used  in a 
manner  inconsistent  with  instructions  regarding  use.  It  also  does  not  cover  damage 
caused by transporting, dropping, negligence or improper care. The exclusive remedy for 
any  product  found  to  be  defective  is  repair  or  replacement,  at 

 

option,  and 

 

shall  not  be  liable  for  any  consequential  or  incidental  damages.  Final 

determination  of  defects  shall  be  made  by 

 

in  accordance  with  procedures 

established  by 

.  If  the  product  is  no  longer  available, 

 

may 

substitute a comparable  product. No agent, employee, or representative of 

 

has any authority to bind 

 

to any affirmation, representation, or 

warranty concerning 

 

products, except as stated herein. 

 

 

Lifetime Warranty for 

CERAMIHEAT

® 

heater: In addition to above, 

 

offers a 

Limited Lifetime Warranty for material and workmanship of the CERAMIHEAT

® 

heater to 

the  original  purchaser  of  any 

 

product  that  is  built  with  the  CERAMIHEAT

® 

technology.  This  warranty  is  valid  to  the  original  purchaser  who  has  purchased  the 
product  from  an  authorized  dealer  and  for  as  long  as  the  original  purchaser  owns  the 
product, but does not cover any part that has been abused or altered by the purchaser. 
The exclusive remedy for a defective CERAMIHEAT

® 

heater is repair or replacement, at 

 

option, and 

 

shall not be liable for any consequential or incidental 

damages.  Final  determination  of  defects  shall  be  made  by 

 

in  accordance 

with procedures established by 

 
 

To the extent permitted by applicable law, any implied warranties are hereby excluded. 
The warranties provided above are limited to the value of the product. If the product is no 
longer available, 

 

may substitute a comparable 

 

product. 

The  above  warranties  are  intended  to  give  you  specific  legal  rights.  In  addition  to  the 
rights described herein, you may also have other rights that vary from province/state to 
province/state or country to country with respect to the exclusion or application of implied 
warranties,  incidental  and  consequential  damages  and  repair  and  replacement. 
Consequently, the limitations or exclusions specifically contained in this warranty may not 
be applicable to you. 

Summary of Contents for CERAMIHEAT smoke monster Pro S 25













Reviews: