9
Opens the configuration window for this counter.
☐
The counter ignores that frame characteristic. These frames will
show in the counter.
☐
The counter filters out the matching frames. These frames will
not show in the counter.
☑
The counter only counts the frames matching this specific filter.
IPv4 / IPv6:
If checked, only packets originating from or destined to
the specified IPv4 / IPv6 address will be taken into account.
Packet size:
If different than
Don’t care
, only packets with a size
matching the configured filter will be taken into account.
Enable On:
Depending on the selection made here, only packets
passing through either Port A, Port B, or both ports, will be taken into
account.
Counting mode:
The
Total
and
Rate
figures can be displayed in
either bytes or number of frames.
EDIT
