PROFILO PSU7A330, Instructions For Use Manual

Page: 15 / 18

13
en
Congratulations on your purchase of a Profilo PSU7 va-
cuum cleaner.
This instruction manual describes various PSU7 mo-
dels, which means that some of the equipment features
and functions described may not be available on your
model.
You should only use original Profilo accessories, which
have been specially developed for your vacuum cleaner
to achieve the best possible vacuuming results.
Fold out the picture pages.
Your vacuum cleaner
1 Adjustable floor tool
2 Hard-floor brush
3 Telescopic tube with adjusting sleeve and locking
collar
4 Handle
5 Flexible hose
6 Accessories holder for multi-purpose nozzle*
7 Multi-purpose nozzle*
8 Cover
9 Exhaust filter*
10 Electronic slide control
11 Dust bag change indicator
12 ON/OFF button
13 Parking aid
14 Power cord
15 Storage aid (on underside of unit)
16 Motor protection filter*
17 Dust bag
* Depending on model
Replacement parts and special accesso-
ries
A Replacement filter package VZ51PT1AFG
("For high suction power"/ "for top performance and
excellent cleaning quality")
Content:
- 5 dust bags with fasteners
- 1 micro-hygiene filter
We therefore recommend that you only use our origi-
nal dust bags.
Your appliance is a highly efficient vacuum cleaner
that achieves excellent cleaning results when used
with high-quality dust bags. Only by using high-
quality dust bags (such as Profilo original dust bags)
can you ensure that your vacuum cleaner is working
at the energy efficiency class, dust pick-up rate and
dust retention capacity listed on its EU energy label.
The use of inferior-quality dust bags (e.g. paper
bags) can have a negative effect on the service life
and performance of your appliance. Using unsuitable
or inferior-quality dust bags can also damage your
vacuum cleaner. Such damage is not covered by our
guarantee.
You can find more information about this at
www.profilo.com/tr. You can order our original vacu-
um cleaner bags here.
Before using for the first time
Figure
Push the handle onto the flexible hose until it engages.
Setting up
Figure
a)
Push the flexible hose adapter into the opening on the
vacuum cleaner until it engages.
b To remove the flexible hose, press the release button and
pull the hose out.
Figure
a)
Connect the handle and the telescopic tube together.
3*
2
1*
Figure
a)
Connect the floor tool and the telescopic tube together.
4*
Figure
To adjust the length of the telescopic tube, adjust the
adjusting sleeve/sliding switch in the direction of the
arrow and adjust the tube to the required length.
5*
/sliding switch in the direction of the
3
5
䡲
䡲
䡲
䡲