PROFILO PSU5 Series, User Manual

Page: 12 / 24

en
Troubleshooting
12
Troubleshooting
▶
Repairs to the appliance should only be
carried out by trained specialist staff.
▶
Only use genuine spare parts when re-
pairing the appliance.
▶
If the power cord of this appliance is
damaged, it must be replaced by the
manufacturer, the manufacturer's Cus-
tomer Service or a similarly qualified per-
son in order to prevent any risk.
Suction is reduced.
Nozzle, telescopic tube or hose are
blocked.
1.
Dismantle the appliance.
2.
Remove the blockage.
Exhaust filter is dirty.
▶
Clean the exhaust filter.
The dust bag is full.
▶
Change the dust bag.
The household fuse trips when the
appliance is switched on.
Several appliances are operated
simultaneously at an electrical mains
supply.
1.
Switch on the household fuse.
2.
Set the lowest performance level.
3.
Switch the appliance on.
Disposing of old appliance
1.
Unplug the appliance from the mains.
2.
Cut through the power cord.
3.
Dispose of the appliance in an environ-
mentally friendly manner.
Information about current disposal meth-
ods are available from your specialist
dealer or local authority.
This appliance is labelled in
accordance with European
Directive 2012/19/EU con-
cerning used electrical and
electronic appliances (waste
electrical and electronic
equipment - WEEE).
The guideline determines
the framework for the return
and recycling of used appli-
ances as applicable
throughout the EU.
Warranty conditions
You can make warranty claims for your ap-
pliance under the following conditions.
The guarantee conditions for this appliance
are as defined by our representative in the
country in which it is sold. Details regarding
these conditions can be obtained from the
dealer from whom the appliance was pur-
chased. The bill of sale or receipt must be
produced when making any claim under
the terms of this guarantee.