20
PSI01000-001_v01
2
Turn the
Temperature Dial (8)
to “●●●”.
3
The
Heater Light (11)
will come on.
The light will go off once the required temperature is reached.
4
Set the
steam switch (9)
in position .
●
The iron is ready for use.
5
Hold the iron between 15 and 30 centimetres away from the garment.
6
Press the
Steam Burst Button (2)
– steam will shoot from the holes of the soleplate.
7
For Stubborn wrinkles, wait a few seconds before pressing the
Steam Burst Button
(2)
again.
It may be necessary to press the Steam Burst Button several times to start
this function.
Do not press the steam burst button when the light is on. Additional steam
can be generated only when the light goes out.
Most wrinkles can be removed within three presses.
When ironing delicate fabrics (synthetics, silk, velvet etc.), keep the iron
a few centimetres away from the garment to prevent damage.
ENDING THE IRONING
1
Turn the
Temperature Dial (8)
counter-clockwise to “
MIN
” position. The will turn off.
2
Set the
steam switch (9)
in position
.
3
Unplug the unit.
4
Empty the
water tank (4)
. See “Emptying The Water Tank”.
5
Fold the
handle (1)
when iron has completely cooled.
6
Store the iron vertically in a safe place.
●
Before storing the iron, make sure that the
steam switch (9)
is in position
.
