PROFILO PPG23300, User Manual

Page: 8 / 12

8
●
Never turn the cord around hair dryer as it causes the
risk of premature wear risk of cord damage. In order to
ensure its long lasting operation the cord is to handled
with care, avoiding tugging, twisting or pulling, especially
when unplugging. If the cord gets twisted during
operation it should be straightened from time to time.
Disposal
Dispose of packaging in an environmentally-
friendly manner. This appliance is labelled
in accordance with European Directive
2012/19/EU concerning used electrical
and electronic appliances (waste electrical
and electronic equipment – WEEE). The
guideline determines the framework for the return and
recycling of used appliances as applicable throughout the
EU. Please ask your specialist retailer about current disposal
facilities.
DIFFUSER
Diffuser allows to dry your hair easily and set a natural
looking hairstyle. Thanks to application of diffuser you will
obtain natural waves (without necessity of applying gel or
styling mousse) and the hair style will last for a longer time.
Hair drying and styling
●
After washing your hair dry it thoroughly with a towel.
●
Affix desired accessory to hair dryer, air concentrator or
hair styling diffuser.
●
Before inserting the plug into the socket make sure that
air stream strength regulation switch (4) is placed in
position „0”. Then plug the appliance.
●
If you want to quickly dry your hair place the air stream
strength switch (4) in position "2".
●
Moving air stream strength regulation switch (4) to
position – will initiate emission of cold air from hair
dryer.
●
When hair dryer is switched on the ionisation function
thanks to which you will easier set your dream hair style
and your hair will remain healthier.
●
In order to fix the hairstyle move air stream strength
regulation switch (4) to position – cold blow.
●
After the drying is finished place the switch of air stream
strength regulation (4) in position "0".
●
After each use always unplug the appliance.
●
Immediately after the use accessories can be hot.
Always leave the appliance to cool down before removal
of accessories.
Cleaning and maintenance of hair dryer
●
After each use switch off and unplug the hair dryer.
●
Never put hair dryer, power supply cord or plug in water
or any other liquid.
●
It is recommended to remove from time to time the air
inlet cover (2) in order to clean it and the net filter (3) ,
located under the cover.
●
When required clean hair dryer casing with a dump cloth
(it can be moistened with some washing-up liquid) dry it
out or wipe it till dry.
●
Do not use scrubbing agents or solvents.
●
Carefully dry all the parts which have been cleaned.
CLEANING AIR INLET COVER AND NETLIKE
FILTER
1 Remove the air inlet cover (2) turning it anticlockwise.
2
Remove the sieve filter (3) .
3 Clean it and wipe it using a dry or dump cloth. After
drying place it in the previous place.
4
Affix the air inlet cover (2) turning it clockwise.
STORAGE
●
If you are not using the appliance always unplug it.
●
After use wait till the hair dryer cools down and place it in
a dry, cold and unavailable to children place.
B
The manufacturer does not accept any liability for any damages
resulting from unintended use or improper handling.
The manufacturer reserves his rights to modify the product any time
in order to adjust it to law regulations, norms, directives, or due to
construction, trade, aesthetic or other reasons, without notifying in
advance.