8
PCK1225X-001_v01
CAUTION!
Not observance can result in damage
to possessions
●
Always plug the appliance to the mains (AC only) with
voltage corresponding to that indicated on the rating
plate.
●
The kettle type covered by this user’s manual brings
water to boil very quickly and draws up to 10 A of
current from the mains.
●
Check that the mains fuses used can cope with this
level of power consumption. While boiling water,
unplug all other appliances from this circuit.
●
Place the kettle on a stable, even and flat surface; the
connecting cord may not hang over the edge of the
surface on which the kettle is placed.
●
Do not remove the plug from the outlet by pulling by
the cord.
●
The kettle can only be operated with the original power
base, each base is type-specific.
●
Use the kettle for boiling water only.
●
Do not open the lid immediately after water has boiled
– steam might condense and appear on the exterior
of the kettle.
●
Do not place the kettle on or near hot objects.
●
Do not immerse the kettle or the power base in water
when filling or washing the electric kettle.
●
In the event that water gets into the inside electric
elements of the kettle, or onto the power base,
carefully dry these elements before plugging the kettle
into the mains.
●
Do not operate the kettle when empty.
●
Do not use the kettle with the lid open – the automatic
shut off will not work then.
●
Do not use any abrasive cleaning agents such as
emulsions, creams, pastes, etc for cleaning the kettle
body. They might remove graphic information symbols
such as: scales, marks, warning signs, etc.
●
The appliance is not intended to be operated by means
of an external timer or separate remote-control system.
●
This appliance is intended for indoor use only.
Technical data
The technical parameters are given on the data plate of the
product.
2 liter capacity.
The kettle is built in insulation class I and is equipped
with a power cord provided with a grounding wire and
a grounding plug.
The Profilo kettle meets the requirements of the standards
in force.
The appliance is compliant with the requirements of the
following directives:
–
The Low Voltage Directive (LVD) – 2006/95/EC.
–
Electromagnetic Compatibility (EMC) – 2004/108/EC.
The product is affixed with a CE Mark on the data plate.
Structure of the kettle
1
Spout
2
Kettle body
3
Dual water indicator
4
Revolving power base
5
Lid release button
6
On/off lever
7
Handle
8
Anti-deposit filter
9
Storage space for the connecting cord
Preparation of the electric kettle for operation
Before the first use, wash the kettle inside
(for washing instructions see “Cleaning and
maintenance”), fill it with water up to the “max”
level, and let it boil four times (use fresh water
each time) and wash again.
Operating instructions of the electric
kettle
1
Press the lid button (5) – the kettle lid will open.
2
Place the filter (8) in the kettle – if it was taken out before.
3
Fill the kettle up with the desired amount of water
(the level is visible on the indicator (3)).
Do not boil the water if it is below the minimum
level or beyond the maximum level on the
indicator (3).
4
Close the lid.
5
Place the kettle on the power base (4).
6
Put the plug of the connecting cord into a mains socket
with an earth pin – the upper part of the kettle body will
light up.
7
Turn the kettle on by pressing the lever (6) – the lever
light and the water level indicator light will come on (3).
A
B
SUGGESTION
Information on the product and
suggestions for its use
●
The appliance is intended for domestic use. In case
it is used for food business purposes, the warranty
conditions change.
●
Do not use the kettle without a filter.
