PROFILO BM4292 Instructions For Use Manual Download Page 21

en

21

... when the appliance
is switched on

The appliance does not start.

The mains fuse has tripped.
The appliance plug has not been
inserted.
The appliance door has not been
shut properly.
The tap has not been turned on.
The filter on the water supply hose
is blocked.
Switch off the appliance and pull
out the mains plug. Turn off the
tap. Then clean the filter which is
situated at the connection of the
supply hose. Finally, restore the
power, turn on the tap and switch
on the appliance.

... with the appliance itself

Lower spray arm rotates with
difficulty

Spray arm is blocked by small
items or food remains.

Lid in detergent compartment
cannot be closed

Detergent compartment has been
overfilled.
Mechanism is clogged with
remnants of detergent.
Indicator lamps do not extinguish
after washing has finished.

Indicator lights flash after
the programme has started.

No programme selected.

 Indicator lamps do not extinguish
after washing has finished

Main switch is still set to ON.

Remnants of detergent stuck inside
dispenser

Compartment was damp when it
was filled up with detergent.
Compartment must be dry before
detergent is added.

“Check water supply” 

5

 display

lights up

Tap turned off or calcified.
Water supply interrupted.
Filter in the water supply blocked.
Supply hose kinked.
The waste water pump is blocked.

Water is left in the appliance
at the end of the programme.

The waste water hose
is blocked or kinked.
The waste water pump
is blocked.
The filters are blocked.
The programme has not yet
ended. Wait until programme
ends (digital display
indicates 0) or implement the
“Reset” function.

... during washing

Unusual amount of foam is created

Normal washing up liquid has
been poured into the rinse-aid
container.
Remove any spilled rinse aid with
a cloth as it could otherwise lead
to excessive foaming during the
next washing cycle.

Appliance stops suddenly while
washing is taking place

Cut in electricity supply to
appliance.
Water supply has been
interrupted.
Implement the “RESET” function.

Knocking sound can be heard
while washing is taking place

A spray arm is knocking against
the dishes inside the appliance.

Summary of Contents for BM4292





























Reviews: