Profile yl-007eg Mobile Call, User Manual

Page: 10 / 15

After successful setting, user will receive a SMS reply with the content
of “OK…”. If the SMS setting format is wrong, user will receive
“FORMAT ERROR!”.
Note:
V. Operation Instruction
1. Answer alarm call
When there is an alarm, the ALARM LED on the panel will be on and
the external siren (if user has connected) will ring for 3 minutes if
there's no operation. Also the device will send alarm SMS to and call
the preset numbers. Press DISARM button on the main panel or the
remote controller, it will stop the alarm.
The alarm system will keep calling all the preset numbers in order if
nobody answers the call. The default circle time is 3.
If someone answers the call, it will enter two-way intercom status
automatically and the siren stops ringing.
Then user can press “1#” to arm,
“2#” to disarm,
“3#” to listen-in,
“4#” to return to intercom.
A long beep means correct operation and three short beeps means
wrong operation.
Operation Instruction
5. Factory reset
Press the [RESET] button for 5 seconds until the LEDs on the panel are
flashing quickly. After this operation, all the settings return to factory
default.
2. Remote control operation
Operation by remote call:
When users are outside and want to monitor the alarm system, he can
call the alarm panel. After getting through the call, user will hear a long