Profile Videophone
EN -
2
PAC-112
Provide a recess behind the camera in the wall or
door frames, connect the wiring using the
connecting blocks and push this into the recess. If
you cannot do this the wires must be twisted
together and insulated with insulation tape.
Use:
A. Having a normal conversation
1.
Ringing on the external unit
2.
The picture automatically appears on the
monitor inside.
3.
Press the conversation key and speak to the
visitor.
4.
The door lock can be operated with the key for
that purpose.
5.
Press the conversation key again to end the
conversation.
B. Making a visual check
1.
If the conversation key is pressed once without
anyone ringing you can check outside without
a sound being heard outside.
2.
You can stop the picture by pressing the
conversation key again.
C. Functions
A) the remote control
1. Exit
2. device button: to select between the memory
card or the USB.
3. Photo:
button to display photos.
4. Setup button: button to go into the menu.
5. arrow keys
6. pause button: button to pause or start again.
7. button to rewind
8. button to fast forward
9. AV:
button to select between
photo frame and video function.
10. OSD: language choice (always choose
English)
11. Power: to switch the menu off.
12. Movie: to immediately play the video.
13. Music: to immediately play the music.
14. Timer: to display the calendar on the screen.
15. Volume: to set the volume.
16. Enter: to confirm the settings.
17. Mute: to switch off the sound.
18. Stop:
to stop the video, music or photo slide
show.
19. Previous track.
20. Next track.
21. 16:9:4:3 = picture settings
22. Zoom: Zoom in or out.
B) the screen
1.
Press the SETUP button on the remote control
to change the settings.
2.
Use the up and down arrow keys to choose a
setting.
3.
You can change the value using the left or
right arrows.
4.
The following settings can be changed:
volume, slide show interval, language (always
choose English), date, time, transient effect for
your photos, picture format, luminosity,
contrast reset.
5.
To leave the menu press exit or wait for 1
minute. The screen will then automatically
leave the menu.
C) Getting started
1. You can get started after you have connected
the power supply. Press power to start up the
screen.
2. Insert the SD/MMC/BS card in the slot or
connect a USB stick.
3. Press the device button on the remote control
and use the arrows to select the desired card
type.
4. Press enter to confirm.
