13
ND
BEEP - The unit is equipped with BEEP 2 , BEEP ALL,BEEP OFF functions. Press the
ND
SEL button for more 2 seconds to display BEEP 2 . Then use the VOL knob
ND
5 to choose among BEEP 2 , BEEP ALL or BEEP OFF modes.
ND
Beep 2 mode: The beep sound is only generated when any one of 6 memory
preset buttons 10 , APS button 18 or SEL button 11 is
pressed for more than 2 seconds.
BEEP ALL mode: The beep sound is generated when any buttons is pressed.
BEEP OFF mode: The beep sound is disabled.
SEEK- The unit is equipped with two types of seeks, SEEK 1 and SEEK 2, for radio
stations. Press the SEL button for more than 2 seconds to display the BEEP
function. Press the SEL button again momentarily to display SEEK 1 or 2.
Then use the VOL knob 5 to switch between SEEK 1 and SEEK 2. (This
adjustment is only available during radio operation)
SEEK 1 mode: Pressing 8 or 9 button for more than 2 seconds will seek
up or down to the next strong station during radio operation.
SEEK 2 mode: Pressing 8 or 9 button continuously will speedily change
station up or down until the button is released.
DSP - The unit is equipped with 4 preset equalization modes. Press the SEL button
for more than 2 seconds to display the BEEP function. Press the SEL button
twice momentarily to display DSP OFF. Then use the VOL knob 5 in the
clockwise direction to choose one of 4 preset EQ s in the following order.
When using preset EQ modes you will not have access to Bass and Treble
settings.
,
DSP OFF FLAT POP
ROCK
SET VOL - A certain volume level can be set to come on when the unit is turned
on or can be set to come on at the same last level before the unit was
turned off. Press the SEL button for more than 2 seconds to display
the BEEP function. Press the SEL button three times momentarily to
display VOL LAST/ADJ. Use the VOL knob 5 to choose between VOL
LAST and VOL ADJ. To set the volume to a certain level, press the SEL
button momentarily when VOL ADJ is displayed. Then use the VOL knob
5 to adjust to certain volume level when A-VOL is displayed.
CLASSIC
FADER - Press the SEL button five times. Adjust the sound balance between front
and rear speakers using the VOL knob 5 .
Press the SEL button for more than 2 seconds to display additional set of functions
ND
for adjustments, such as BEEP 2 /All/OFF, SEEK 1 / 2, DSP, Volume Last/Adjust,
and ESP 40 /ESP 10.
I
I
I
I
