4
Initialization
Chapter 3. Initialization
Correct initiation of the main panel is important to its normal working
and lifespan.
1. Connect the wired accessories that you need.
2. Insert SIM card.
3.
Chapter 4. System Settings
All the settings have to be done in setting status. Press 2/8/4/6 to turn
up/ down/ left/ right.
1. Enter Settings
Fig 1: disarm status
System
disarmed
888888
Enter:
System
disarmed
11/12/12 11:49
Remote control
Exit
Enter
Fig 2: please enter password
Fig 3: press ENTER to set
4. There will be a shoot beep after searching GSM network successfully.
The signal icon will display on the screen and the power status LED
will flash every 3 seconds.
Connect the power adaptor. The main panel will start self-inspection
and the POWER indicator LED will flash once. If this LED does not
light on, you need to restart the panel. Please do it at least 10
seconds later as repeated power on and off in short time is bad to
the panel's service life.
5. Turn on the battery switch.
6. Check the GSM signal icon on the LCD screen. Signal less than 3
lattice will affect the normal performance. Please put the main panel
at the place with good GSM signal.
Enter setting status: in the state of disarm, input 6-digit password
(system default: 888888), and then press ENTER. The main panel
makes a “beep” and SET indicator lights on. The screen shows remote
controller setting.
