background image

13

 

      

      BEEP - The beep sound when you press a button on the unit can be turned on or 
                  off. Press the SEL button for more than 2 seconds to display the DSP 
                  function. Press the SEL button again momentarily to display BEEP ON/OFF. 
                  Then use       5   button to turn on/off the beep sound.

      SET VOL - A certain volume level can be set to come on when the unit is turned 
                        on or can be set to come on at the same last level before the unit was 
                        turned off. Press the SEL button for more than 2 seconds to display 
                        the DSP function. Press the SEL button four times momentarily to
                        display VOL LAST/ADJ. Use       5   button to choose between VOL LAST
                        and VOL ADJ. To set the volume to a certain level, press the 
                        SEL button momentarily when VOL ADJ is displayed. Then use        5  
                        and       6   buttons to adjust to certain volume level when A-VOL is 
                        displayed.

13  

CD TOP/PAUSE

      In CD play mode, press the TOP       13 button to pause CD play. Press again to 
      resume normal play.

      In CD play mode, press the TOP       13 button for more than 2 seconds to go back
      to the top of the disc and play the first track.

14  

CD SCAN

      In CD play mode, press the INT  14  button to turn on intro playing first 10
      seconds of each track. When wish to listen to the whole track during intro mode, 
      press the button again to turn off intro.

    SEEK- The unit is equipped with two types of seeks, SEEK 1 and SEEK 2, for radio
                 stations. Press the SEL button for more than 2 seconds to display the BEEP
                 function. Press the SEL button twice momentarily to display SEEK 1 or 2.
                 Then use        5   button to switch between SEEK 1 and SEEK 2. 
                 (This adjustment is only available during radio operation) 

              SEEK 1 mode: Pressing      9  or       10  button for more than 2 seconds will seek
                                      up or down to the next strong station during radio operation.
              SEEK 2 mode: Pressing      9  or       10  button continuously will speedily change
                                       station up or down until the button is released.

    12 H / 24 H- The unit is equipped with two types of clock formats, 12 hour and 24
                         hour. Press the SEL button for more than 2 seconds to display the DSP
                         function. Press the SEL button three times momentarily to CLOCK 12
                         or 24. Then use       5   button to choose between 12 and 24. 

15  

REPEAT  PLAY

      In CD play mode, press the RPT  15  button to continuously playing the current 
      track. Press it again to cancel the repeat feature.

+

+

+

-

I

I

+

+

Summary of Contents for CD8700





















Reviews: