EN
ELTRA NV
Pachtgoedstraat 2
9140 Temse
www.profile.eu
Art. 201100012
•
Comfort icons
•
Dryness: Temperature in any value and humidity is below 40%
•
Comfort: When temperature is from 20-28-C and humidity is 40-70%.
•
Humidity: Temperature is any value and humidity is beyond 70%
•
No display :when temperature is not in 20-28-C and humidity is 40-70%
I. RCC-ontvangst
•
When you start or reset the device, it automatically receives RCC.
•
Press "T" 2 seconds to RCC to receive manually.
•
Automatically receive Automatically receiving time :
At 1:00,2:00,3:00,4:00,5 :00 am. each day, automatically. It must receive at 1:00,
2:00, 3:00. lf fail receiving on 3:00, it will continue to receive at 4:00,5:00, if
success at 4:00, it won’t receive again during the day. Otherwise it will continue
receive at 5:00, regardless of the success receiving alter 5:00 am it will be no
longer receive RCC during the day, RCC reception DCF (up to) 7 minutes.
When entered RCC receiving, the RCC symbol will be blinking. When received the
signal, the RCC symbol will be static
When the signal is weak and hard to find out the correct signal, the symbol be
blinking.
When success receiving RCC reception, the symbols will display and exit receiving
state.
When receiving, press "T" 2 seconds to exit RCC receiving. Press SNZ/LIGHT to light
and no function other keys.
If de device fails receiving in the day, the next time receiving would be from 1h00
at the next day
When received the DST signal, the DST will display in the LCD.
When RCC symbol display, alter resetting the time, RCC symbol will disappear.
J. RF RECEPTION
•
Receiving RF for 3 minutes automatically after testing temperature and
humidity when the battery is assembled.
•
Antenna symbol twinkles (near the outdoor temperature)
•
Press "CH" for 2 seconds to cancel the registration of the present channel,
and reregister this channel data.
•
When the registered CH temperature haven't received the effect symbol in
the same ID code in 60 minutes, the CH displays "--.-“
•
Then start to receive for 3 minutes.(Only receive registered ID)
K. OPEN AND RESET
The LCD display fully for 3 seconds when changing new battery or resetting,
meanwhile backlight lighten 3seconds, !hen with a sound BI into the normal
state, testing temperature and humidity, receiving RF for 3 minutes, no matter
receive or not, it will exit after 7 minutes.
Warranty
The warranty period is 2 years, and commences on the date of purchase. During
the warranty period Eltra NV will resolve any defects caused by material or man-
ufacturing faults. Eltra NV may, at its own discretion, repair or replace the faulty
device.
Eltra NV is under no obligation to repair or replace devices if the failure is a result
of damage, misuse, modification or changes made after the date of purchase.
Bring the faulty device, along with the original sales receipt, back to the store
where the device was sold. Always include a note with a description of the
problem.
Eltra NV can, under no circumstances, be held liable for damages of any kind if the
device is not properly installed according to the prescribed instructions for instal-
lation, or for damage due to unforeseen circumstances such as natural disasters,
lightning ... All costs arising from this shall therefore be charged to the buyer and
are not covered by the warranty.
