Profile Design ERGO+ ARMREST KIT, Manual, Page: 9 / 12

Ergo+ & Race+ Armrest Kits
8
1. To fit the armrests first ensure the inner face of the armrest is free of lint and
grease, if the armrest has previously had a hook and loop sticker applied the
residue should first be removed either mechanically or with a citrus based solvent.
2. Before applying the hook and loop sticker, you may choose to wipe down the
surface with isopropyl alcohol to ensure good adhesion. Remove the backing from
the hook and loop sticker and apply it to the armrest, smoothing the sticker out to
ensure there are no air bubbles trapped under it.
3. Allow the sticker 24 hours to cure before use.
HOW TO INSTALL NEW ARMPADS