GB
Thank you for choosing our rechargeable electric pump. Please read the manual carefully before using this product, which can be
applied to cars, bicycles, motorbikes, balls, inflatable toys, etc. It can also be used as pressure gauge.
1.Electric pump
2.“+” “-” presetkeys
4.UNIT key
5.Power switch
Operation
•The pump can be charged/recharged by connecting it either to the car cigar jack (12V adapter, included) or to a common
household power outlet (AC power adapter, included). The electric pump should be well charged before using.
Inflation:
• Connect the threaded end of the air tube to the inflator and plug the other end to the tyre valve core. For a French valve,
connect the French adaptor to the tube first.
• Repeatedly press the “UNITS” button to choose your target pressure unit (PSI, BAR, KPA or kg/cm²). The “+” and “-” buttons are
preset-keys. Press either button repeatedly for adjusting the target pressures lowly; keep pressing for adjusting the target
pressure quickly.
• Press the power button to start inflating. (While inflating the COB LED lights up)
• When the tyre has been inflated to the set point, the electric pump will stop inflating automatically. Press the power button to turn
of the COB LED. You can also stop the inflating process and turn off the pump manually by pressing the power button at any
time (in this case the light is switched off at the same time).
• After inflation, disconnect the tube from the valve core.
• Store in a dry, clean environment.
Pressure test function:
• Connect electric pump to tyre, then press the "unit" button and the LCD will show the current pressure.
No load function:
• If no pressure is detected while the pump is activated, it will turn off automatically after 60 seconds.
Turn on/off the COB light:
• When the LCD is not activated, press the power switch to turn on/off the COB light.
Charging:
• The battery icon on the LCD shows the power status of the device. Latest when the icon shows one bar only, connect the
electric pump to a power source. When using the AC adapter, a red LED light indicates charging. When the battery is fully
charged, the LED light will turn green.
Product Overview
1. Electric pump
2. “+” “-” preset keys
3. LCD
4. UNIT key
5. Power switch
6. Charging port
7. Air hose and adapters
8. AC adaptor
9.12V car charger
10. COB LED (360 lumen)
Rechargeable Electric Pump - 29774
Guide value for required tyre pressure (for safety reasons, do always confirm the required pressure of respective tyre as
stated by the manufacturer): ordinary bicycles 30-50 PSI/2.1-3.5 bar, mountain bikes 40-60 PSI/2.7-4.1 bar, road bicycle
80-120 PSI/5.5-8.3 bar, car 30-40PSI/2.1-2.8 bar. Pressure tol 3 PSI (+ 0.2 BAR).
