Profi Cook PC-WKS 1108, Instruction Manual

Page: 40 / 68

40
Cleaning
WARNING:
• Always turn the device off before cleaning it and pull the power
plug (8). Wait until the appliance has cooled down.
• Never immerse the device or the base unit (7) in water or other
liquids.
CAUTION:
• Do not use a wire brush or abrasives for cleaning.
• Do not use acrid or abrasive cleaning agents.
• Rinse the water tank with clean water. Then dry it
with a cloth.
• Clean the housing after use with a slightly damp
cloth.
Descaling
• The intervals at which you should perform descaling
depend on the hardness of the water and the fre-
quency of use.
• Descaling is necessary if the appliance turns off be-
fore the water is boiling.
• Please do not use vinegar, but a commercially avai-
lable decalcification agent on the basis of citric acid.
Only use the quantities stated in the instructions.
NOTE:
After descaling the appliance, boil fresh water sever-
al times (approx. 3-4 times) to remove any residues.
Do
not
consume this water.
Troubleshooting
Problem Possible
cause
Solution
It is not possible
to switch the
appliance on.
Appliance
without power
supply.
Check the
socket with
another appli-
ance.
Connect the
power plug (8)
properly.
Check the fuse.
Appliance
defective.
Contact our
service center
or a specialist.
After operation
without or with
too little water,
the appliance
has not cooled
sufficiently.
Let the applian-
ce cool down
for 15 min.
The machine
switches off
before the water
has boiled.
The inside of
the water kettle
is stained with
excessive
limestone or
the circuit of the
wall socket is
overloaded.
Descale the
appliance as
instructed.
Check the
connection to
the mains.
The appliance
does not switch
off.
The lid (3) is not
closed correctly.
Close the lid (3)
until it locks.