Profi Cook PC-TA 1193, Instruction Manual

Page: 33 / 58

PC-TA1193_IM 30.10.19
33
Special Functions
The buttons on the appliance can only be used if the appli-
ance has been turned on by using the carriage lever.
NOTE:
Warming or thawing:
The relevant LED indicates the function.
Stop To stop toasting in process.
Warming To warm bread already toasted.
Thawing To thaw and toast deep-frozen bread.
Bread Roll Attachment (Removable)
Want to warm up or toast some rolls?
Place the bread roll attachment onto the toasting slot.
CAUTION:
• Do not overload the bread roll attachment! Place a
maximum of one roll on the bread roll attachment!
• Set the browning control to level 3 at maximum.
• Wait for one minute between two toasting cycles.
• Never coat the roll with fat or butter. Fat could drip
down and ignite!
WARNING: Danger of burns!
Let the bread roll attachment cool down before storing it
again.
NOTE:
In addition, you can also serve toast slices in the bread
roll attachment.
Cleaning
WARNING:
• Pull the mains plug out of the mains socket before you clean the
appliance and allow the appliance to cool down.
• Do not immerse the appliance in water! Doing so may result in
an electric shock or fire.
CAUTION:
• Do not use any wire brush or other abrasive objects.
• Do not use abrasive or aggressive cleaners.
Housing, Bread Roll Attachment
Only use a slightly damp cloth to clean the outside of the
appliance.
Crumb Tray
The crumb tray is located on the opposite side to the
carriage lever.
• Pull the crumb tray out by the handle, remove the small
pieces of bread and push the tray back in place.
Storage
WARNING:
As the housing and the metal parts become hot during
operation, allow the appliance to cool down before putting
it away.
• Clean the appliance as described and allow to dry
completely. We recommend to keep the appliance in the
original packaging if the appliance will not be used for
long periods.
• Always keep the appliance out of the reach of children in
a dry, well ventilated place.
Mains Cable Take-Up Appliance
The mains cable can be wound up on the base.