manualshive.com logo in svg

Professional Sound Corporation DV Promix 3, Quick Start Manual, Page: 1 / 4

Share
Download
Professional Sound Corporation DV Promix 3 Quick Start Manual Download Page 1

PROFESSIONAL SOUND CORP. 

 

DV PROMIX 3 

 

QUICK START GUIDE 

 
 

1. BATTERIES 

 

Install two, fresh 9V alkaline batteries noting the correct polarity. 

 
2. POWER 

SWITCH 

 

Set the power switch to the internal battery by moving it upward towards the “BATT” 
marking. 

 
3. INPUT 

LEVELS 

 

Select the appropriate input level by selecting “D”, “L” or “C” on the toggle switch located 
next to each input XLR connector.  Select “D” for use with Dynamic microphones (non-
powered microphones).  Select “L” for use with line level sources such as the line 
outputs from CD players.  Select “C” for use with condenser microphones (48PH 
powered microphones). 

Summary of Contents for DV Promix 3

Page 1: ...by moving it upward towards the BATT marking 3 INPUT LEVELS Select the appropriate input level by selecting D L or C on the toggle switch located next to each input XLR connector Select D for use with Dynamic microphones non powered microphones Select L for use with line level sources such as the line outputs from CD players Select C for use with condenser microphones 48PH powered microphones ...

Page 2: ...ones designed to operate from 48PH or 9 52PH or 9 52 simplex power For all other uses select DYN 5 CONNECT MICROPHONES Connect your microphones using standard XLR microphone cables 6 LOW CUT FILTERS For use indoors or outdoors with no wind present select 20 For outdoors with light wind conditions select 80 For outdoors with high wind conditions select 150 ...

Page 3: ...DIR 9 OUTPUT LEVELS The output XLR s can be set to either microphone level MIC or to line level LINE This level must match the input level of your camera See your camera s owner s manual for proper level selection When in doubt set the DV Promix 3 s outputs to MIC and try it If you find the audio level to be very low or non existent then set the switches to LINE ...

Page 4: ... volume to a comfortable level DV PROMIX 3 TROUBLE SHOOTING GUIDE MIXER DOES NOT POWER UP 1 Power switch set to off or external 2 Batteries dead 3 Batteries installed backwards AUDIO DISTORTED AT THE MIXER 1 Input level switch set incorrectly 2 Channel fader set to high AUDIO DISTORTED AT CAMERA ONLY 1 Output level switch set to LINE when camera is set to MIC AUDIO SHOWS ON METERS BUT HEADPHONES D...

Reviews:

No comments