9
Use instruction
Mount the fire prevention filter on the bottom of the container
cover; the filter must be removed and cleaned of dust after
prolonged use.
Connect coupling 1 and the pipe firmly to the two ends of the
hose.
Put the tube in the fireplace or stove to suck up ash.
Connect the plug to the socket.
To switch on: Set the switch to "I".
Switch off: Set the switch to "O".
Move the suction tube with slight pressure slowly and evenly over
the dirt.
Maintenance and Care
Stop the vacuum.
Pull the mains plug out of the socket.
Disconnect hose, pipe and container.
Clean coupling 1, coupling 2, hose and pipe and make sure
they are not blocked.
Use a damp cloth to clean the plastic parts.
Empty the container, tap the stop to loosen it and wash it if
necessary.
Brush dust on the fire prevention filter and wash it if
necessary.
Do not use cleaning agents, solvents or sharp objects for this
purpose.