-6-
4
Hardware Setup
All the following explanation screens use the PL's factory settings (default settings).
•
Normally, the factory default settings should be used.
•
Certain BIOS screen items may differ from those shown here due
to new versions.
4
1)
Connect a keyboard to the PL.
2)
Right after turn the PL unit's power ON, keep on pressing [F2] key.
The Setup utility will start.
3)
Depending on the PL-HD240's installation point (Expansion Slot 0 or 1), the follow-
ing menu will be displayed.
• When installing to the Expansion Slot 0: [Primary Master]
• When installing to the Expansion Slot 1: [Secondary Master]
Point the cursor to either [Primary Master] or [Secondary Master] on [Main] menu
and press the [Enter] key and the following screen appears.
•
Be sure to use the PL-HD240 as Master setting for PL-X930 Se-
ries units. For the details, see [2. Hard Disk Unit Settings].
4)
Confirm whether "AUTO" is selected for [Type]. (The factory setting is "AUTO"
and recommended for most users.)
5)
Press the [ESC] key and the screen returns to the previous one. Select [Exit] menu
and point the cursor to [Exit Saving Changes] and press the [Enter] key. The system
settings will be saved and this process will exit and the OS will then start.
