PROFACE PL-B900 Series, User Manual

Page: 81 / 98

PL-B900/B910 Series Users Manual
6-1
This chapter provides information about the set up of the PL’s Windows
®
95,
Windows ® 98 Second Edition, or Windows ® NT operating systems (OS).
The Digital Electronics Corporation has prepared the following additional pro-
gram files which are not supported by the standard versions of the Windows
®
95,
Windows
®
98 Second Edition and Windows NT
®
4.0 operating systems. These
files must be installed from the additional “PL-X900 Series Driver & Ultility
Disk” and the “USB Touch Panel Control Utility Disk”.
To set up the OS with these files, you will need to prepare one of the FDD units,
the PL-FD200 or the PL-FD210 (only for the PL-B910/PL-B900), and a PS/2
compatible keyboard.
6-1 Setting Up Your PL OS
6.1 Setting Up Your PL OS
Chapter
6 OS Setup
Be sure to read the Driver and Utility Disk README documents prior to using the
PL unit, since they contain the latest PL related information and manual updates.
The software contained in the PL's accompanying “PL-X900 Series Driver &
Ultility Disk” and the “USB Touch Panel Control Utility Disk” is designed spe-
cifically for use with only the Windows type of OS. If this software is used with
other OS types, its performance cannot be guaranteed.
PL Model OS Type Utility Disk
PL-B900 Series units
(PL-B900/PL-B901)
Windows ® 95, Windows ® NT
PL-X900 Series Driver and
Ultility Disk
PL-X900 Series Driver and
Ultility Disk
USB Touch Panel Control
Utility Disk
PL-B910 Series units
(PL-B910/PL-B911)
Windows ® 98
Second Edition