13
Note: Wires deeper than the detection limit from the surface, in conduit, or behind plywood
shearwall will not be detected. Use caution under these circumstances.
The signal strength of a ‘Live’ wire depends on the location of the cable. Therefore, take further
measurements nearby or use other information to check for ‘Live’ wires.
Non - ’Live’ wires may be detected as metal objects and thin wires may not be detected.
MAINTENANCE
This instrument is designed to provide years of dependable service, if the following care
instructions are performed:
Keep the wall detector dry and free from dust.
Use and store the wall detector in nominal temperature conditions. Temperature extremes can
shorten the life of the electronic parts and distort or melt plastic parts.
Handle the wall detector carefully and avoid shock and vibration. Dropping the wall detector may
damage the electronic parts or the case.
Keep the wall detector clean. Wipe the case occasionally with a damp cloth. DO NOT use
chemicals, cleaning solvents, or detergents.
Use only fresh batteries of the correct type. Remove old or weak batteries so they do not leak and
damage the unit.
If the wall detector is to be stored for long periods, the batteries should be stored separately to
prevent damage to the unit. Use the included protective case to store and carry the detector.
RECYCLING AND DISPOSAL
Recycle unwanted materials instead of disposing of them as waste. All tools, hoses and
packaging should be sorted, taken to the local recycling centre and disposed of in an
environmentally safe way.
Recycle rather than dispose of unwanted material in landfill whenever possible. The machine
must be delivered in rigid packaging to avoid damage during transportation. The packaging and
the machine itself are manufactured from recyclable materials and should be disposed of
accordingly.
Only dispose of electrical/electronic/battery terms in separate collection schemes, which cater
for the recovery and recycling of materials contained within. Your cooperation is vital to ensure
the success of these schemes and for the protection of the environment.
Recycle packaging where facilities exist.
This symbol is known as the Crossed out Wheelie Bin Symbol. When this symbol is
marked on a product or battery, it means that it should not be disposed of with your
general household waste. Some chemicals contained within electrical/electronic
products or batteries can be harmful to health.
Summary of Contents for 502291833
Page 106: ...106...
