1
Operation instruction
GB
Attention:
Please read the following instructions carefully to ensure that mounting
operation will be carried out in the right way. These instructions should be properly
preserved for future reference.
I.
Technical Data
Type:
Rated Power:
Remark:
L2691
28 W
Electric shock protection class: I
External light protection class: IP54
Lamp socket size: LED
Rated voltage:220-240V~ 50/60Hz
II.
Safety instructions
1. Before mounting and maintenance please make sure that the electrical supply has been
switched off to avoid electric shock.
2. The lamp must be earthed.
3. The power cord must be VDE-certified H07RN-F 3x1.5mm
2
waterproof cable.
4. Replace any cracked protective shield
5. If the external wire or power cord of this luminaire is damaged, it shall be exclusively replaced
by the manufacturer or his service agent or a similar qualified person to avoid the hazard.
6. Check if the stand is stable and it has a firm footing. Ensure cable is not touching any sharp
objects and the mains plug connector is adequately protected against rain or moisture. Now
your lamp is ready for use.
CAUTION:
The light
source of lamp can not be replaced, please replace a whole new
lamp if the light source broken.
Summary of Contents for 501966880
Page 18: ......
