PROEL V10WAVE User Manual Download Page 3

 

 

3

 

DISPOSAL OF OLD ELECTRICAL & ELECTRONIC EQUIPMENT

 

This marking shown on the product or its literature, indicates that it should not be disposed with 
other household wastes at the end of its working life. To prevent possible harm to the enviroment 
or human health from uncontrolled waste disposal, please separate this from other types of wastes 
and recycle it responsibly to promote the sustainable reuse of material resources. Household users 
should contact either the retailer where they purchased this product, or their local government 

office, for details of where and how they can take this item for environmentally safe recycling. Business users 
should contact their supplier and check the terms and conditions of the purchase contract. This product should 
not be mixed with other commercial wastes for disposal.

 

GENERAL SAFETY INSTRUCTIONS

 

 

CAUTION

  -  Before  using  this  product  read  carefully  the  following  safety  instructions.  Read  this  manual 

entirely and preserve it for future reference. When using any electric product, basic precautions should 
always be taken, including the following:

 

 

To reduce the risk, close supervision is necessary when the product is used near children.

 

 

Protect the apparatus from atmospheric agents and keep it away from water, rain and high humidity places.

 

 

This product should be site away from heat sources such as radiators, lamps and any other device that generate heat.

 

 

Care should be taken so that objects and liquids do not go inside the product.

 

 

The  product  should  be  connected  to  a  power  supply  only  of  the  type  described  on  the  operating 
instructions or as marked on the product.

 

IN CASE OF FAULT

 

 

In case of fault or maintenance this product should be inspected only by qualified service personnel when:

 

 

Liquids have spilled inside the product.

 

 

The product has fallen and been damaged.

 

 

The product does not appear to operate normally or exhibits a marked change in performance.

 

 

Do not operate on the product, it has no user-serviceable parts inside.

 

 

Refer servicing to an authorized maintenance center.

 

PACKAGING, SHIPPING AND COMPLAINT

 

 

This unit package has been submitted to ISTA 1A integrity tests. We suggest you control the unit conditions 
immediately after unpacking it.

 

 

If any damage is found, immediately advise the dealer. Keep all unit packaging parts to allow inspection.

 

 

Proel is not responsible for any damage that occurs during shipment.

 

 

Products are sold “delivered ex warehouse” and shipment is at charge and risk of the buyer.

 

 

Possible damages to unit should be immediately notified to forwarder. Each complaint for manumitted 
package should be done within eight days from product receipt.

 

WARRANTY AND PRODUCTS RETURN

 

 

Proel products have operating warranty and comply their specifications, as stated by manufacturer. 

 

 

Proel warrants all materials, workmanship and proper operation of this product for a period of two years 
from the original  date of  purchase.  If  any  defects  are  found in  the  materials  or  workmanship  or  if  the 
product fails to function properly during the applicable warranty period, the owner should inform about 
these defects the dealer or the distributor, providing receipt or invoice of date of purchase and defect 
detailed  description.  This  warranty  does  not  extend  to  damage  resulting  from  improper  installation, 
misuse, neglect or abuse. Proel S.p.A. will verify damage on returned units, and when the unit has been 
properly  used  and  warranty  is  still  valid,  then  the  unit  will  be  replaced  or  repaired.  Proel  S.p.A.  is  not 

Summary of Contents for V10WAVE





















Reviews: